Problem 5: Fixed-simple supported beam
The equations for all 3 thermal load cases are shown below, the colors represent temperature field (white is high and black is low). The equations give the axial deformation u of the beam, the deflection w of the beam, and the axial stresses in the beam.
 | Boundary Conditions: u (x=0) = 0 w (x=0) = 0 β (x=0) = 0 u (x=L) = 0 w (x=L) = 0 M (x=L) = MT |
The figure of the deformed beam illustrates the deflection resulting from load case C. Colors represent the axial stress field (green is zero, red is positive and blue is negative). Note that the boundary effects as shown in the figure is not included in the equations!
| Name | Symbol | Units | Description |
| Shear force | D | N | Internal shear force as function of the longitudinal direction (x) |
| Young’s modulus | E | N/m2 | Young’s modulus of the material |
| Axial force | F | N | Internal axial force as function of the longitudinal direction (x) |
| Height | H | m | The total length of the beam |
| Length | L | m | The total length of the beam in longitudinal direction |
| Moment | M | N/m | Internal moment as function of the longitudinal direction (x) |
| Temperature | ΔT | K | The biggest temperature difference in the beam |
| Axial deformation | u | m | Axial deformation of the beam as function of the longitudinal direction (x) |
| Deflection | w | m | Deflection of the beam as function of the longitudinal direction (x) |
| CTE | α | K-1 | Coefficient of thermal expansion (CTE) of the material |
| Rotation | β | rad | Rotation of the beam as function of the longitudinal direction (x) |
| Axial stress | σx | m | Axial stress of the beam, i.e. combined thermal and mechanical stress, as function of the longitudinal direction and the direction perpendicular (x and y) |
References
Frank de Groot, senior engineer at Tegema, has been awarded the Bronze ECP2 certificate. He achieved this by following a number of courses that have been certified in the ECP2...
Read more
First Belgian winner of Dutch design engineering award At the seventeenth edition of the Precision Fair, held on 15 and 16 November in Veldhoven, the Netherlands, DSPE (Dutch Society...
Read more
During the SYMPOSIUM ‘Post graduate education in precision engineering, today and tomorrow’ at the Precision Fair November 19, 2016. David Billington,Executive Director euspen (left) and Jan Willem Martens, Chairman Certification Program DSPE...
Read more